Transportation and storage, Inspect the delivery, Inspect the package – Bell & Gossett 10 001 247 R3 TechnoForce Package System User Manual
Page 9: Inspect the unit, Transportation guidelines, Lifting methods, Storage guidelines, Storage between use, Inspect the package inspect the unit
Transportation and Storage
Inspect the delivery
Inspect the package
1. Inspect the package for damaged or missing items upon delivery.
2. Note any damaged or missing items on the receipt and freight bill.
3. File a claim with the shipping company if anything is out of order.
If the product has been picked up at a distributor, make a claim directly to the
distributor.
Inspect the unit
1. Remove packing materials from the product.
Dispose of all packing materials in accordance with local regulations.
2. Inspect the product to determine if any parts have been damaged or are missing.
3. If applicable, unfasten the product by removing any screws, bolts, or straps.
For your personal safety, be careful when you handle nails and straps.
4. Contact the local sales representative if there is any issue.
Transportation guidelines
Lifting methods
WARNING:
• Assembled units and their components are heavy. Failure to properly lift and support
this equipment can result in serious physical injury and/or equipment damage. Lift
equipment only at the specifically identified lifting points. Lifting devices such as
eyebolts, slings, and spreaders must be rated, selected, and used for the entire load
being lifted.
• Crush hazard. The unit and the components can be heavy. Use proper lifting methods
and wear steel-toed shoes at all times.
• Tip over hazard. Do not use component eyebolts to lift the pump station. The eyebolts
are only designed to lift the components to which they are attached.
• Do not attach sling ropes to the panel stand.
Storage guidelines
Storage location
The product must be stored in a covered and dry location free from heat, dirt, and
vibrations.
NOTICE:
• Protect the product against humidity, heat sources, and mechanical damage.
• Do not place heavy weights on the packed product.
Storage between use
Observe the following for long-term storage of a pump station.
• Insure system is drained of any water.
• Remove transducers to ensure that they do not freeze.
• System may be top-heavy, brace to keep from tipping.
Transportation and Storage
TechnoForce and TechnoForce XLS Package System Mechanical Installation, Operation, and Maintenance
Manual
7