Rivera Primo Stiffeytm - Manual (Page 3)

NOTE: The pivot pin is not centered in the
swingarm, so it is important to align the
offset hole in the Stiffey
TM with the pivot
pin. The Stiffey TM will install easily with lit-
tle pressure if the hole is aligned correctly.
Now re-install the passenger footboards, the exhaust and the saddlebags per your OE serv-
ice manual. Have a great day and a fantastic ride with your new StiffeyTM!
Figure 12 Figure 13
Figure 11
Install the pre-greased spacer into the empty bushing side of the rear fork bracket until seated. Re-
align the two holes in the bracket with the threaded holes in the frame and then install and torque the
two hex head bolts. (
On 1980-2006 models, use the .155” spacers; on 2007 later models
use the .050” spacers).
Figure 14 Figure 15
GENERAL WARRANTY
Rivera Primo Inc.’s sole obligation and the customer’s sole remedy is limited to replacement or repair of products free of
charge in the event products fail to perform as warranted for a period of one year from actual date of purchase. Proof of
purchase must accompany any warranty claim. In no event shall Rivera Primo Inc. be liable for claims for any other dam-
ages, whether direct, incidental, foreseeable, consequential, or special (including but not limited to loss of use, revenue or
profit), whether based upon warranty, contract, tort (including negligence) or strict liability arising in connection with the sale
or the failure of Rivera Primo Inc. products to perform in accordance with the stated specifications.
Rivera Primo Inc. makes no other warranty of any kind whatsoever, and specifically disclaims and excludes all other war-
ranties of any kind or nature whatsoever, directly or indirectly, express or implied, including, without limitation, as to the
suitabilitly, productivity, durability, fitness for a particular purpose or use, merchantability, condition, or any other matter with
respect to Rivera Primo Inc. products.