Moving parts entanglement hazard – Rugged Ridge 3,000 Pound Heavy Duty Winch, ATV/UTV User Manual
Page 5
5
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to minor or
moderate injury.
• Always keep wired remote control lead clear of the drum, rope
and rigging. Inspect for cracks, pinches, frayed wires or loose
connections. Replace remote control if damaged.
•
Never leave remote control where it can be activated during
freespooling, rigging, or when the winch is not being used
•
Always require operator and bystanders to be aware of ATV/
UTV and or load.
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to minor or
moderate injury.
General Safety:
•
Always know your winch. Take time to fully read the Installation
Guide and the Basic Guide to Winching Techniques in order to
understand your winch and its operation.
•
Never operate this winch if you are under 16 years of age.
•
Never operate this winch when under the influence of drugs,
alcohol or medication.
•
Never exceed winch or rope capacity listed on product data
sheet. Double line using a snatch block to reduce winch load
Installation Safety:
•
Always choose a mounting location that is sufficiently strong to
withstand the maximum pulling capacity of your winch.
•
Always use factory approved mounting hardware, components,
and accessories.
•
Always use grade 5 (grade 8.8 metric) or better mounting
hardware.
•
Never weld mounting bolts.
•
Always use care when using longer bolts than those supplied
from factory. Bolts that are too long can damage the base and/
or prevent the winch from being mounted securely.