Rugged Ridge 3,000 Pound Heavy Duty Winch, ATV/UTV - Manual (Page 4)

4
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to severe injury or
death. To avoid injury to hands or fingers:
• Always keep hands clear of rope, hook loop, hook and fairlead
opening during installation, operation and when spooling in or
out.
• Always use extreme caution when handling hook and rope
during spooling operations.
• Always use supplied hook strap whenever spooling rope in or
out, during installation, and during operation.
• Always keep ATV/UTV in sight during winching operation.
• Always wear heavy leather gloves when handling rope.
Chemical and Fire Hazard
Failure to observe these instructions could lead to severe injury or
death.
• Always remove jewelry and wear eye protection.
• Never lean over battery while making connections.
• Always verify area is clear of fuel lines, fuel tank, brake lines,
electrical wires, etc. when drilling.
• Never route electrical cables:
» Across any sharp edges.
» Through or near moving parts.
» Near parts that become hot.
• Always insulate and protect all exposed wiring and electrical
terminals.
Installing Your Winch
Take a moment to read and understand all instructions and safety
information before attempting installation or use of your Rugged
Ridge
® ATV/UTV recovery winch. Specifications and sample
performance (line speed & pull) for your model winch are set out
on pages 20-22 herein.
If you have any questions regarding the installation and
operation of your ATV/UTV winch, contact Rugged Ridge ®
Technical Support at 770-614-6101.