Rugged Ridge 3,000 Pound Heavy Duty Winch, ATV/UTV - Manual (Page 10)

10
Figure 1: Orientation of winch to mounting plate and bolt lengths
Step 2 - Mount the Control Box
(Figure 2)
The control box is a primary safety feature in your winch system. It
disconnects your winch from its power source when the ATV is not in
use.The control box must be correctly installed to work properly. It is
recommended that the control box be mounted close to the battery and
in a location that is as clean and dry as possible. Exact location will vary,
depending on the ATV. Usual locations include inside, on top, or on the
side of rear storage box, and on a few models, under the seat.
Ensure the control box mounting location selected provides sufficient
clearance from all metal structures such as frame tubes. Do NOT place
tools or other items in a position that might come in contact with the
control box directly. Drill the mounting holes for the control box at this
time, then move on to step four as it will be easier to attach all the wiring
to the control box before attaching it to the ATV. Do NOT mount the
control box at this time.
Figure 2: ATV/UTV Control Box