Rugged Ridge Hurricane Flat Fender Flare Kit, 07-14 Wrangler - Manual (Page 8)

460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada ® , Inc.
16. Use factory screws previously removed and 45mm washers to
secure wheel liner where
Red Arrows indicate.
Replace factory nut where Green Arrow indicates.
15. Place and position cut front liner in wheel well.
17. Attach rear wheel liner, mark a line that follows the edge of
the fender. Cut the line marked.
2 Door JK Owners Skip to Step 19
Cutting/Sharp Edge Hazard: Cut carefully using gloves and
eye protection.
Page 6/8
Hurricane Flat Fender Flares
PATENT PENDING
11640.10
CAUTION !