Goulds Pumps API 3171 - IOM - Manual (Page 23)

Install the packed stuffing box
WARNING:
Packed stuffing boxes are not allowed in an ATEX-classified environment.
The stuffing box is packed at the factory. The packing is lubricated by a grease cup supplied with the
pump.
1. Fill the grease cup with any lithium-based #2 grease.
2. Install the grease cup on the tapped opening on the stuffing box.
3. Turn the cap on the grease cup several turns in order to inject the grease into the packing.
4. Hand-tighten the gland nuts.
355
193I
494V
367B
106
221
107
353
355C
105
364A
190G
105 Lantern ring 353 Gland stud
106 Packing set 355 Gland nuts
107 Gland 355C Insert nuts
190G Pipe nipple 364A Packed box insert
193I Grease cup 367B Insert gasket
221 Stuffing box support 494V Pipe elbow
Install the pump, driver, and coupling
1. Mount and fasten the pump on the baseplate. Use applicable bolts.
2. Mount the driver on the baseplate. Use applicable bolts and hand tighten.
3. Install the coupling.
See the installation instructions from the coupling manufacturer.
Installation
Model API 3171 Installation, Operation, and Maintenance Manual 21