AMD 7ZMMC - Manual (Page 24)

BIOS Setup
20
Power Management Setup
Figure 5: Power Management Setup
••••
ACPI Standby State
S1/POS Set ACPI Standby State to S1. (Default Value)
S3/STR Set ACPI Standby State to S3.
•
USB Dev Wakeup From S3~S5
Enabled Enable USB Dev Wakeup from ACPI S3, S4 and S5 mode.
Disabled Disable USB Dev Wakeup from ACPI S3, S4 and S5 mode.
(Default Value)
••••
Suspend Time Out (Minute.)
Disabled Disable Suspend Time Out Function. (Default Value)
1 Enable Suspend Time Out after 1min.
2 Enable Suspend Time Out after 2min.
4 Enable Suspend Time Out after 4min.
8 Enable Suspend Time Out after 8min.
10 Enable Suspend Time Out after 10min.
20 Enable Suspend Time Out after 20min.
30 Enable Suspend Time Out after 30min.
40 Enable Suspend Time Out after 40min.
50 Enable Suspend Time Out after 50min.
60 Enable Suspend Time Out after 60min.
••••
Display Activity
Ignore Ignore Display Activity. (Default Value)
Monitor Monitor Display Activity.
••••
IRQ 3~IRQ15
Ignore Ignore IRQ3 ~IRQ15.
Monitor Monitor IRQ3~IRQ15.
•
Soft-off by Power Button
Instant-off Soft switch ON/OFF for POWER ON/OFF. (Default
value)
Suspend Soft switch to enter Suspend Mode.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
ACPI Standby State S1/POS RTC Alarm Hour 12
USB Dev Wakeup From S3~S5 Disabled RTC Alarm Minute 30
Suspend Time Out (Minute) Disabled RTC Alarm Second 30
Display Activity Ignore
IRQ3 Monitor
IRQ4 Monitor
IRQ5 Ignore
IRQ7 Monitor
IRQ9 Ignore
IRQ10 Ignore
IRQ11 Ignore
IRQ13 Ignore
IRQ14 Monitor
IRQ15 Ignore
Soft-Off by Power Button Instant-Off
System after AC Back Last State ESC : Quit ↑↓→ ← : Select Item
Resume On Ring/LAN Enabled F1 : Help PU/PD+/-/ : Modify
Resume On PME# Enabled F5 :Old Values (Shift)F2:Color
Resume On RTC Alarm Disabled F6 : Load BIOS Defaults
RTC Alarm Date 15 F7 : Load SETUP Defaults