Minka Group F707-FLP - Manual (Page 15)

7
Slide the Canopy up over the Hanger Bracket and place the keyholes from Canopy
over the two screws from the Hanger Bracket. Rotate Canopy until it locks at the
narrow section of the
keyholes. While holding the Canopy in place with one hand, slide the Canopy
Cover over the screw heads and rotate until snug. (Fig. 17)
NOTE:Adjust screws as needed until Canopy and Canopy Cover are snug. (Fig. 17)
FINISHING THE INSTALLATION
Fig.17
CANOPY
CANOPY COVER