Myron L 9PTK User Manual

Page 52

For computers with Bluetooth capability/Bluetooth dongle installed:

First time use of the bluDock:

Press any parameter button to turn the Ultrameter III on.

Put the Ultrameter III in “Pc On” mode by pressing the

key until “Pc OFF” appears (see Figure 30).

Then press the

key. “Pc On” will be displayed (see

Figure 31).

nOte: “Pc ini” may momentarily be displayed while initializing (see

Figure 32).

Add bluDock to your Bluetooth devices per your operating

system procedure. the blUDOcK Device PassKey is 1234.

After pairing, note the number of the COM port assigned by

the computer. In Windows XP, note the number of the outgoing

COM port assigned by the computer.

nOte: The unit will automatically power down after 60 sec. If the unit

powers down during pairing, repeat steps 1-3 above and continue.

C. Memory Stack Download

With the Ultrameter III in “Pc On” mode, open the U2CI