Myron L 9PTK - Manual (Page 45)

41
4. Press any measurement key or allow to automatically turn off.
Xi. temPeratUre FOrmat “centigrade & Fahrenheit”
1. Press .
2. Press to display the stored memory records.
3. Press repeatedly until you pass the “Us” or “int” date
format location. The display will show a “c” or “F”
(see Figures 18 and 19).
4. Press to switch units.
5. Press to accept unit preference for all temperature
readings.
nOte: Tempco will still be shown in %/°C.
Xii. tOtal retUrn to FactOry settings “Fac sel”
There may come a time when it would be desirable to quickly reset all
the recorded calibration values in the instrument back to the factory
settings. This might be to ensure all calibrations are set to a known
value, or to give the instrument to someone else free of adjustments or
recorded data for a particular application.
nOte: all stored data will be lost.
1.
Press .