Myron L 6P and 4P - Manual (Page 29)

25
format location. The display will show a “C” or “F”
(see Figures 18 and 19).
4. Press to switch units.
5. Press to accept unit preference for all temperature
readings.
NOTE: Tempco will still be shown in %/°C.
XII. TOTAL RETURN to FACTORy SETTINGS “FAC SEL”
There may come a time when it would be desirable to quickly reset
all the recorded calibration values in the instrument back to the factory
settings. This might be to ensure all calibrations are set to a known
value, or to give the instrument to someone else free of adjustments or
recorded data for a particular application.
NOTE: All stored data will be lost.
1. Press .
2. Press to display the stored memory records.
3. Press repeatedly
until you pass the CL
r
ALL
and the C-F locations. The
display will show a “FAC
SEL” (see Figure 20).
4. Press to accept the resetting. Display will return to Cond.
Figure 18 Figure 19
Figure 20