DiGiCo SD Series Broadcast - Manual (Page 10)

DiGiCo SD Series Broadcast Options
1-10
Floating Controls Floating Meters
Configuring Speaker sets
The column of buttons marked Speaker select a, b, c are assigned to the Speaker Select Switches in the Master Section of the console
worksurface and can also be selected on this page. When pressed they will switch the monitoring signal to one of the three sets of
speakers. They could, for example, be configured as 5.1, stereo main and stereo nearfields
To Assign a Speaker set to a button
Touch the white label box beneath one of the a, b or c on screen buttons and a new panel will appear which allows you to select a
speaker setup from the user defined list. Touch one of the New Mono/Stereo/LCR/LCRS/5.1 buttons and this will put a new entry in the
list. Its name will initially appear as its type but it can be renamed by typing into the Name box.
To assign the speaker set to a different button, select a speaker set from the list by touching it on screen and then press the Assign
button. Now select one of the speaker buttons a, b, or c from the drop down list.
Define Speaker Sets Routing to Speakers