DiGiCo SD5 - Manual (Page 21)

SD5 - Getting Started
1-17
1.9 Channel Processing
1.9.1 Dynamic EQ ...........................................................................
The EQ section comprises four user-configurable parametric filters with Dynamic Control for up to 24 Channels and a pair of
swept High-pass and Low-pass filters.
The EQ is accessed by touching the on screen display to Assign the channel (the colour changes to yellow) and then using
the controls on the right hand side of the input module.
When a control is adjusted the expanded view seen below appears on the screen. This view can be seen at any time by touching
the EQ response graph on the screen.
NOTE: If the expanded view does not appear when a control is adjusted open the Options panel and set the
Auto Expand EQ option to Yes
Each band's response can have one of two characters – precision and classic. These can be switched for all bands using the
precision and classic buttons, or on individual bands using the 2nd function of the bell/hishelf buttons.
To access the Dynamic control, touch the left arrow symbol on any EQ band.
Touching the normal EQ response graph will show an expanded view in a separate panel.
The order of EQ and Dynamics in the channel signal path can be changed using the worksurface button at the bottom of the EQ
section.
Order of EQ
and Dyamics
EQ Presets
HPF/LPF
4 Bands
Dynamic EQ
Controls
Note: The type of filter used by each band can be changed by successive presses of the Curve button for that
band.