Beijer Electronics iX Panel TA100 EN - Manual (Page 41)

Software
12.2 Update Software
When an update is available, an e-mail is sent to the distributors. The software is
also available on the manufacturer’s web site.
The update should be installed by qualified personnel.
12.2.1 iX Developer
iX Developer is not a freeware product.
A demo version can be downloaded from
www.beijerelectronics.com .
To update iX Developer, an accredited iX Panels dealer must be contacted.
12.2.2 Remote Access Viewer
This software is included on the iX Developer USB stick.
To update the Remote Access Viewer, go to
www.beijerelectronics.com and select
Support/Downloads in the menu. Browse the software folder to locate Remote
Access Viewer. Run the .exe file and follow the instructions.
12.2.3 System Program
An upgrade of the complete software package is sometimes needed to take
advantage of new functionality.
The upgrade is done by running the Image Loader executable file,
IML_TA70–150_bxxx.exe. The Image Loader application will help and guide you
through the upgrade.
Two upgrade options are available:
• Upgrading the System Program Using a USB Memory Stick
• Upgrading the System Program via Ethernet
When the upgrade is finished, the operator panel will receive the default IP address
192.168.1.1. Follow the instructions on the screen after startup to change the IP
address.
Note:
The Image Loader software is only intended for customers and partners that have an
operator panel. No other distribution is allowed.
Note:
When upgrading an operator panel, it is important to ensure that power is not
interrupted during the upgrade.
Beijer Electronics, MAEN013A 41