AZEK InDeck - Manual (Page 3)

All machine screws should
be inserted into all holes
and finger tightened.
Mount hinge
with D facing
outwards.
Place 24 1/8” spacers
starting at the ends and
working toward the center.
7
8 9a
Cut & Place Deck Boards
On Rain Shield
Assemble Rain
Shield onto Frame
Assemble Trim Ring
6 Assemble Deck
Hinges
Cut Side
#10 x 1 1/4” Flat Head
Phillips Wood Screws
(x25)
Hinge
Deck Side
(x2)
#10 x 1 3/4” Flat
Head Phillips
Wood Screws
(x8)
22 3/4" 5 1/2"
(x1)
28 5/8"
5”
(x2)
28 5/8"
5 1/2"
(x10)
5 1 / 8 ”
5 1 / 8 ”
3/8” x 1/8”
Notch is
centered.
All machine screws should
be inserted into all holes
and tightened.
10a Assemble Hinges
#10 Flat
Washer (x8)
Lid Hinge (x2)
#10 Hex
Nut (x8)
3/8”
#3 9b Flip entire lid assembly upside
down to secure through bolts
10# Flat Washer (x7)
#10-32 Nylon Insert Locking Nut (x7)
10-32x 1 3/4” Flat Head
Phillips Machine Screw (x7) 10-32x 1 3/4” Flat
Head Phillips Machine Screw (x8)
Orient slot to
handle/lock side.
Mount hinge
with L facing
outwards.
• End pieces ripped to 5 1 / 8 ” width.
• Notch keeps center board from
floating.
#2
#3
IN-DECK STORAGE INSTALLATION GUIDELINES for
Arbor Collection ‰ / Harvest Collection / Terra Collection ‰ Page 3
© 2011 All rights reserved. AZEK Building Products, Inc. www.AZEK.com