AZEK InDeck - Manual (Page 2)

1 2
3
Cut and Assemble
Joists Cut Opening
Assemble Deck Ring
5
30"
Joist (x2) Deck boards flush with all joists.
Assemble Gas
Springs and Bucket
30" 73 1/4"
90°
#10 x 1 3/4” Flat
Head Philips Wood
Screws (x8)
Gas Spring (x2)
Spacer (x2)
Shoulder Screw (x2)
All 4 corners must be square.
Use 14 of
the 1 / 8 ”
spacers
per side.
1 / 8 ” gaps
insure
overall
length of
73 1 / 4 ”.
1/2” cut back
deck board to
clear pawl.
4b
Assemble Support
Brackets
3/8” x 1 3/4”
Lag Screws
(x18)
8” 21” 21” 8”
1. Assemble
Gas Springs,
both sides
5/32”
2. Assemble
Bucket &
Vents or
Plugs
3. 1/4-20 x 1” (x4)
Wide Slotted
Machine screw
Orient tabs
opposite
1/2” cut.
Deck boards flush
with all joists to insure
same deck spacing
and lid spacing.
4a Measure for TUB
Support Brackets
8”
Measure
from inside
of frame
9/16”
Tub support
bracket (x3)
#3
IN-DECK STORAGE INSTALLATION GUIDELINES for
Arbor Collection ‰ / Harvest Collection / Terra Collection ‰ Page 2
© 2011 All rights reserved. AZEK Building Products, Inc. www.AZEK.com