Pulsafeeder Pulsa Series Pulsamatic Controls - Manual (Page 2)

ii
PULSA SERIES GUARANTEE
Should you experience a problem with your Pulsafeeder pump, first consult the troubleshooting guide
in your operation and maintenance manual. If the problem is not covered or cannot be solved, please
contact your local Pulsafeeder Sales Representative, or our Technical Services Department for further
assistance.
Trained technicians are available to diagnose your problem and arrange a solution. Solutions may
include purchase of replacement parts or returning the unit to the factory for inspection and repair.
All returns require a Return Authorization number to be issued by Pulsafeeder. Parts purchased to
correct a warranty issue may be credited after an examination of original parts by Pulsafeeder.
Warranty parts returned as defective which test good will be sent back freight collect. No credit will
be issued on any replacement electronic parts.
Any modifications or out-of-warranty repairs will be subject to bench fees and costs associated with
replacement parts.
In addition, Pulsafeeder guarantees its PULSA Series drive assemblies for a period of two years from
the date of shipment. All other material and workmanship are fully covered for a period of one year.
Any parts found to be defective within the above time span will be replaced free of charge, F.O.B.
factory.
Equipment or accessories manufactured by others but purchased through Pulsafeeder, such as electric
motors, are guaranteed only to the extent of the original manufacturer.
Damages incurred from misuse, abuse, and/or improper protection during storage will be cause to
void the guarantee. Erosion, corrosion, or improper application of the equipment or related piping by
the buyer or any third party is also excluded from the guarantee.
The above guarantee is in lieu of any other guarantee, either expressed or implied. We make no
warranty of fitness or merchantability. No agent of ours is authorized to make any warranty other
than the above.
Safety Considerations:
1. Read and understand all related instructions and documentation before attempting to install or
maintain this equipment
2. Observe all special instructions, notes, and cautions.
3. Act with care and exercise good common sense and judgment during all installation, adjustment, and
maintenance procedures.
4. Ensure that all safety and work procedures and standards that are applicable to your company and
facility are followed during the installation, maintenance, and operation of this equipment.
Information in this document is subject to change without notice. No part of this publication may be
reproduced, stored in a retrieval system or transmitted in any form or any means electronic or mechanical,
including photocopying and recording for any purpose other than the purchaser’s personal use without the
written permission of Pulsafeeder, Inc.