EXONIC EXD 7088GPS2 - Manual (Page 29)

25
map.
Tap to change your starting point; you will be taken to the Search Menu screen. You can then enter the start point
just as if you had entered a destination. Once the start point has been entered the unit will begin calculating the route and
then start navigation automatically.
Tap to keep your current location as the start point, the unit will begin calculating the route and then start
navigation automatically.
4.4 Destination Management
4.4.1 Add or delete destination(s)
Kudos Navigation System allows you to add up to three waypoint and destinations. Usually the start point is the GPS-fixed
current position.
: tap it and enter “Search Menu” to search waypoint/destination (refers to Chapter 3).
: tap it and the highlight waypoint/destination in green is deleted.
4.4.2 Change the sequence of destination
: tap it to move up the highlight waypoint/destination.
: tap it to move down the highlight waypoint/destination.
Gray key means the function is disabled.
4.4.3 Display destination on map
◎ In “Route Plan” screen, tap and enter the map
location of the highlight waypoint/destination. Here allow you:
a. To pin on map and check information of the
waypoint/destination.
b. To zoom out/in;
c. To draw map in all directions
Picture 4.2 Destination on Map