Ariens 921006 - ST1130DLE - Manual (Page 8)

GB - 8
PACKAGE CONTENTS
ASSEMBLY
Tools Required:
• Pliers
• Open-End Wrenches: 3/8, 7/16, 1/2,
9/16 in. and/or Adjustable Wrench
• Tire Gauge
Unfold Handlebar (Figure 5)
1. Remove the lower and loosen the upper
wing knobs on the handlebar assembly.
2. Loosen the wing nuts on the shift rod.
3. Put the speed selector lever in the first
forward position.
4. Rotate the handlebars into operating
position.
5. Install and tighten all wing knobs and
wing nuts on the handlebar assembly
and shift rod.
ASSEMBLY
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: Dropping or tipping
over boxed unit could result in
personal injury or damage to unit.
Figure 3
1. Sno-Thro
Unit
2. Discharge
Chute
3. Chute Rod
4. Literature
Pack with
Extra
Shear Bolts
1
2
4
3
OS7019
921004, 006, 007, 008, 009
Figure 4
1. Sno-Thro
Unit
2. Discharge
Chute
3. Chute Rod
4. Literature
Pack with
Extra Shear
Bolts
1
2
4
3
OS7021
921005