CatEye CC-MC200W [Micro Wireless] - Manual (Page 5)

CC-MC200W ENG 5 Operating the computer [Various functions]
Setting the function to display
Displaying only selected data can be done.
Tm Dst Dst2 Av
Mx Odo
Tm Dst Av
Mx
Setting
method
See “Changing the computer settings: Setting the function”
(Page 7).
* The current speed (Spd), and the elapsed time (Tm) cannot be hidden.
* When you hide the function assigned to the top display, the upper dis-
play returns to the current speed (Spd).
* The unit keeps recording hidden data on background and each mea-
surement data is updated when displayed (except for the stop watch).
Stop watch
The time can be measured regardless of start/stop of the measurement.
It can be used when the auto mode is on ( illuminated).
• Start/Stop : Press the SSE button together with the unit. flashes
during measurement.
• Reset : Display the stopwatch ( ), and hold down the main
unit along with the SSE button.
* How to reset the trip distance 2 (Dst2) and the stop-
watch displayed in top row of screen
Display the current speed (Spd) in bottom row of
screen and perform the reset operation.
=
MODE
Upper display selection
Any data can be selected for the top display, and constantly be displayed.
Tm Tm
Spd Spd Tm Tm
Spd Spd
Setting
method
See “Changing the computer settings: Setting the upper dis-
play” (Page 6).
* The stopwatch cannot be set when the auto-mode is off.
Power-saving function
If the computer has not received a signal for 10 minutes, power-saving
screen will activate and only the clock will be displayed. When you press
MODE, or the computer receives a sensor signal, the measuring screen
reappears.
* If another 12 hours of inactivity elapses in the power-saving screen,
only the speed unit is displayed on the screen. With such a screen,
pressing the MODE button returns to the measurement screen.
SSE+MODE
Starting/Stopping
measurement
Power-saving
screen
Sleep
10 minutes
12 hours
MODE
Backlight (Night mode )
With the night mode turned on, pressing the MODE
button turns on the backlight (for 5 seconds).
Pressing any button while the backlight is still on
extends the illumination for another 5 seconds.
Setting
method
Pressing and holding the MODE button proceeds to setting
the night mode. Pressing and holding the button again turns
on the night mode, and returns to the measurement screen.
* The night mode is automatically turned off without any signal received
for 10 minutes.
* You can switch ON/OFF also from the menu screen.
See “Changing the computer settings: Setting the night mode” (Page 6).
* When (battery icon) is turned on, the backlight is not turned on even
if the night mode is on.
ON
MODE
OFF
Measuring
screen
Selecting the
night mode
screen
ON
ON
MODE
(Press & hold)