CatEye CC-MC200W [Micro Wireless] - Manual (Page 4)

Tire size icon
Auto mode icon
CC-MC200W ENG 4 Operating the computer [Measuring screen]
Clock display
Elapsed Time
0:00’00” – 9:59’59”
Stop watch (*2)
0:00’00 - 9:59’59”
Total Distance
0 – 99999 km[mile]
Trip Distance
0.00 – 999.99 km [mile]
Maximum Speed
0.0 – 105.9 km/h
[0.0 – 65.0 mph]
Trip Distance-2
0.00 – 999.99 km [mile]
Average Speed (*1)
0.0 – 105.9 km/h
[0.0 – 65.0 mph]
Starting / Stopping measurement
There are two measurement methods; manual mode and auto mode.
Setting
method
See “Changing the computer settings: Selecting the auto
mode” (Page 7).
The speed unit (km/h or mph) flashes during measurement.
* The maximum speed and total distance are updated regardless of start/
stop of the measurement.
• Auto mode ( illuminated)
Measurements start automatically when the bicycle is
in motion.
START STOP
• Manual mode
Press the SSE button together with the unit to start/
stop the measurement.
SSE+MODE
Starting/Stopping measurement
* When the computer is removed from the bracket, press the SSE
button on the front and the MODE button on the back simultane-
ously.
Resetting data
Pressing and holding SSE together with the unit on the
measurement screen resets any measurement data, ex-
cept the total distance (Odo), trip distance-2 (Dst2), and
stopwatch ( ).
* The total distance (ODO) is not reset.
• Resetting separately the trip distance-2 and stop watch
To reset the currently displayed data, display trip distance 2 (Dst2) or
the stopwatch( ), and hold down the main unit along with the SSE.
* How to reset the trip distance 2 (Dst2) and the
stopwatch displayed in top row of screen
Display the current speed (Spd) in bottom row of
screen and perform the reset operation.
Switching computer function
Pressing the MODE button switches the measurement data at the bottom in the order shown in the following figure.
Current speed
0.0 ( :4.0 / :3.0) – 105.9 km/h
[0.0 ( :3.0 / :2.0) – 65.0 mph]
* “Spd” icon is displayed when display-
ing current speed at the bottom.
Sensor signal icon
Flashes in synch with a sensor signal.
Pace arrow
Indicates whether the current speed
is faster ( ) or slower ( ) than the
average speed.
Speed unit
*1 When Tm about 10 hours, or Dst exceeds 999.99 km, .E will appear.
Reset the data.
*2 It appears only in the auto mode.
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Click
Click
MODE operation when
the computer is mount-
ed on the bracket
SSE+MODE
SSE
ON
OFF
SSE+MODE
(Press & hold)