Changing the computer settings [menu screen, Cc-rd410dw eng 7, Searching for sensor id – CatEye CC-RD410DW [Strada Digital Wireless] User Manual

Page 7: Setting the clock, Entering the total distance, Selecting the measurement unit

CC-RD410DW

ENG

Changing the settings

(Press & hold)

MENU

Changing the computer settings [Menu screen]

Searching for sensor ID

Search the speed sensor (heart rate) IDs.
* The sensor ID was synchronized with this unit before shipment.

Search the sensor ID only when a new sensor is used.

Setting the clock

Set the clock.

Entering the total distance

Enter the total distance.

Once you enter any value to the total distance, you can start from the value you entered. Use

this function when you renew and/or reset your unit.

Selecting the measurement unit

Select the speed unit (km/h or mph).

MODE

Changing the settings

(Press & hold)

In case of SP1

and SP2

In case of HR

In case of cancel-

lation or 5 minutes

of inactivity

(Press & hold)

MODE

(Press & hold)

MODE

RESET

12h ↔ 24h

MODE

km/h ↔ mph

MODE

Increase

the value

MODE

Increase

the value

MODE

Switch the screen

(press & hold)

MODE

Move digits

(press & hold)

MODE

(Press & hold)

MODE

To “Setting the upper display”

To “Entering the total distance”

From “Setting the tire circumference”

From “Setting the clock”

0 – 23

[1 – 12]

00 – 59

00000 – 99999

MENU

Register the

setting

Register the

setting

Register the

setting

Register the

setting

MODE

SP1 SP2 HR

Hour

Minute