CatEye CC-RD410DW [Strada Digital Wireless] - Manual (Page 5)

Option *1
Heart rate sensor
(HR-10)
CC-RD410DW ENG 5 Operating the computer [Measuring screen]
HR sensor signal icon
With the optional heart rate sensor worn,
it flashes when a signal is received.
Elapsed Time
0:00’00” – 9:59’59”
Clock
0:00 – 23:59
Heart rate (*1)
Cadence
0(20) - 199 rpm
Total Distance
0 – 99999 km[mile]
Trip Distance
0.00 – 999.99 km
[mile]
Maximum Speed
0.0(4.0) – 105.9 km/h
[0.0(3.0) – 65.9 mph]
Trip Distance-2
0.00 – 999.99 km
[mile]
Average Speed (*2)
0.0 – 105.9 km/h
[0.0 – 65.9 mph]
Starting/Stopping measurement
Measurements start automati-
cally when the bicycle is in
motion.
During measurement, km/h or
mph flashes.
Upper display selection
The cadence ( ) or the heart rate ( ) can be switched to the upper dis-
play to monitor it constantly.
Setting method See “Changing the computer settings: Setting the upper
display” (Page 6).
* The optional heart rate sensor is required to measure the heart rate.
Resetting data
Pressing and holding the MODE button on the measure-
ment screen resets any measurement data, except the
total distance (Odo) and trip distance-2 (Dst2).
* The total distance (Odo) is not reset.
• Resetting separately the trip distance-2
Pressing and holding the MODE button with the trip distance-2 (Dst2)
displayed resets only the data of the trip distance-2.
Power-saving function
If the computer has not received a signal for 10 minutes, power-saving
screen will activate and only the clock will be displayed.
With such a screen, pressing the MODE button returns to the measurement screen.
* If another 60 minutes of inactivity elapses in the power-saving screen,
only the speed unit is displayed on the screen.
START STOP
Switching computer function
Pressing the MODE button switches the measurement data at the bottom in the order shown in the following figure.
Measuring screen
Current
speed
Current speed
/ Cadence
Cadence Heart
rate (*)
Heart rate (*)
/ Cadence
Heart rate (*)
/ Current speed
10 minutes 60 minutes
Power-saving screen Sleep screen
Start measurement Stop measurement
Current speed
0.0 (4.0) – 105.9 km/h
[0.0 (3.0) – 65.9 mph]
* “S” icon is displayed when
displaying current speed at
the bottom.
Speed sensor signal icon
It flashes in synch with a speed sensor
signal.
Pace arrow
Indicates if the current speed is faster
or slower than the average speed.
( Faster, Slower)
Sensor icon
The speed sensor currently
synchronized is displayed.
Speed unit
*1 In combination with the optional heart rate sensor, it displays the heart rate.
*2 When Tm exceeds about 27 hours, or Dst exceeds 999.99 km, .E will appear. Reset the data.
MODE
MODE
MODE MODE MODE
MODE MODE
MODE
MODE
MODE
Click
MODE operation when
the computer is mount-
ed on the bracket
(Press
& hold)