Changing the computer settings [menu screen, Cc-rd420dw eng 7, Searching for sensor id – CatEye CC-RD420DW [Strada Digital Wireless] User Manual

Page 7: Setting the clock, Entering the total distance, Selecting the measurement unit

CC-RD420DW

ENG

MENU

Changing the computer settings [Menu screen]

Searching for sensor ID

Search the heart rate and speed sensor IDs.
* The sensor ID was synchronized with this unit before shipment.

Search the sensor ID only when a new sensor is used.

Setting the clock

Set the clock.

Entering the total distance

Enter the total distance.

Once you enter any value to the total distance, you can start from the value you entered. Use

this function when you renew and/or reset your unit.

Selecting the measurement unit

Select the speed unit (km/h or mph).

MODE

RESET

12h ↔ 24h

MODE

km/h ↔ mph

MODE

To “Setting the upper display”

To “Entering the total distance”

From “Setting the tire circumference”

From “Setting the clock”

0 – 23

[1 – 12]

00 – 59

00000 – 99999

Changing the settings

(Press & hold)

In case of SP1

and SP2

In case of HR

In case of cancel-

lation or 5 minutes

of inactivity

(Press & hold)

Increase

the value

Switch the screen

(press & hold)

Hour

Minute

(Press & hold)

Changing the settings

(Press & hold)

Increase

the value

Move digits

(press & hold)

Register the

setting

Register the

setting

MENU

Register the

setting

Register the

setting

MODE

SP1 SP2 HR