CatEye CC-RD430DW [Strada Digital Wireless] - Manual (Page 6)

CC-RD430DW ENG 6
Starting/Stopping measurement
Measurements start automati-
cally when the bicycle is in
motion.
During measurement, km/h or
mph flashes.
Upper display selection
The heart rate ( ) or the cadence ( ) can be switched to the upper dis-
play to monitor it constantly.
Setting method See “Changing the computer settings: Setting the upper
display” (Page 7).
Resetting data
Pressing and holding the MODE button on the measure-
ment screen resets any measurement data, except the
total distance (Odo) and trip distance-2 (Dst2).
* The total distance (Odo) is not reset.
• Resetting separately the trip distance-2
Pressing and holding the MODE button with the trip distance-2 (Dst2)
displayed resets only the data of the trip distance-2.
Power-saving function
If the computer has not received a signal for 10 minutes, power-saving
screen will activate and only the clock will be displayed.
With such a screen, pressing the MODE button returns to the measure-
ment screen.
* If another 60 minutes of inactivity elapses in the power-saving screen,
only the speed unit is displayed on the screen.
START STOP
MODE
Operating the computer [Measuring screen]
HR sensor signal icon
It flashes in synch with a heart rate sensor signal.
* The position changes according to the heart rate
display position.
Elapsed Time
0:00’00” – 9:59’59”
Clock
0:00 – 23:59
Heart rate
0(30) – 199 bpm
Cadence
0(20) – 199 rpm
Total Distance
0 – 99999 km[mile]
Trip Distance
0.00 – 999.99 km
[mile]
Maximum Speed
0.0(4.0) – 105.9 km/h
[0.0(3.0) – 65.9 mph]
Trip Distance-2
0.00 – 999.99 km
[mile]
Average Speed (*1)
0.0 – 105.9 km/h
[0.0 – 65.9 mph]
Switching computer function
Pressing the MODE button switches the measurement data at the bottom in the order shown in the following figure.
Current
speed
Current speed/Cadence
Cadence Heart
rate
Heart rate/Cadence Heart rate/Current speed
Start measurement Stop measurement
Current speed
0.0 (4.0) – 105.9 km/h
[0.0 (3.0) – 65.9 mph]
* “S” icon is displayed when
displaying current speed at
the bottom.
Pace arrow
Indicates if the current speed is faster or slower
than the average speed. ( Faster, Slower)
Sensor icon
The speed sensor currently synchronized is dis-
played.
Speed unit
*1 When Tm exceeds about 27 hours, or Dst exceeds 999.99 km, .E will appear. Reset the data.
MODE
MODE
MODE MODE MODE
MODE MODE
MODE
MODE
Click
MODE operation when
the computer is mount-
ed on the bracket
Speed sensor signal icon
It flashes in synch with a speed sensor signal.
Measuring screen
10 minutes 60 minutes
Power-saving screen Sleep screen
(Press
& hold)