Balboa Water Group Revolution - Manual (Page 38)

Revolution
Transforming the Control of Hot Tubs
38
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Pumps, Operation
Press the “Jets 1” button once to turn pump 1 on or off, and to shift between low
and high speeds if equipped.
If left running, the pump will turn off after a time-out period.
The pump 1 low speed will time out after t 30 minutes.
The high speed will time out after t 15 minutes.
On non-circ systems, the low speed of pump 1 runs when the blower or any other
pump is on.
TIP
If the spa is in t Ready Mode, Pump 1 low may turn on for at least 1 minute
every 30 minutes to detect the spa temperature (polling) and then to heat to
the set temperature if needed.
When the low speed turns on automatically, it cannot be deactivated from t
the panel; however, the high speed may be started by pressing the “Jets”
button.
READY RANGE FLTR1
JETS TS S J AUX U X A LIG GH IGHT T H HEAT AT T JETS AUX LIGHT HEAT