Balboa Water Group LM8 User Manual
Page 9
9
TEMPERATURE UNITS SETTING
Home > Setup > Temperature > Select [Temp Units]
To have your temperature display in Celsius or Fahrenheit,
activate Temp Units by using the Temp button. Then use the
arrows to toggle between F or C. Once the preference is made,
use the Back button to go Home.
SCREENSAVER
The screensaver activates after approximately 10 minutes of
no user interaction. A blank white screen will appear.
INVERTING THE DISPLAY
Inverting the display screen allows you to adjust the menus
easily whether you are in or out of your spa. To invert the display,
select the “INVERT” button on the main menu screen.
FILTRATION SETTINGS
Home > Setup > Filter
The filtration cycles, duration, and start and stops times are
adjusted within the Filtration Screen. Once within the screen,
scroll to choose the start time. Press On/Off to turn the cycle
on. Scroll to the desired stop time, then press On/Off for the
stop cycle time. Repeat for additional filter cycles.
To review your filtration settings, scroll through the screen
using the Up and Down arrows and observe at what times
the filtration times are scheduled to turn on and off. To clear
the menu, press Clear All. To set filtration at 24 hours, select
Select All.