beautypg.com

Digital output, Alarm status table – Panasonic WV-ASC970 - User Manual

Page 44

background image

44

F3: Gen
Displays or hides the general status display.
F4: Mon
Displays or hides the moitor status display.

Note:

• Refer to the illustrations in p. 35 for each OSD

item.

• T & D and Gen are available in only WJ-SX650 or

WJ-SX850 switch node.

Digital Output

Note:

• This function is available only when Digital Output

setting has been established through the admin
console. (Refer to the Admin Console User's
Guide.)

1. Display "DigiOut" menu. (Refer to Step 1 of p. 41

To Recall Menu Functions.)

2. Select a Digital Output number by pressing the

numeric buttons.

3. Press the F1 (Set) or CAM(SET) button. A one-shot

pulse will be produced, and an assigned event will
be activated.

Note:

• Digital Output does not support the restore func-

tion.

Alarm Status Table

The table shows the alarm statuses.

1. Select a desired monitor. (Refer to p. 27 Monitor

Selection.)

2. Display "AlmStat" menu. (Refer to Step 1 and 2 of

p. 41 To Recall Menu Functions.)

DigiOut: 007

Set

AlmStat: 008

On Off Blk

3. Select a desired function by pressing one of the F1

to F3 buttons.

Available buttons and functions
F1: On
Opens the ALARM STATUS table.
F2: Off
Closes the ALARM STATUS table.
F3: Blk
Changes the monitor background beween camera

images and black picture.

NAME: Alarm text
(Refer to p. 39 for other columns on the table.)

4. To display the next page, press the + button.
To display the previous page, press the – button.

Note:

• To display the first page of table, press the + but-

ton while holding down the SHIFT button.

• To display the last page of table, press the – button

while holding down the SHIFT button.

5. To exit the ALARM STATUS table, perform one of

the following.

• Select a camera. (Refer to p. 27 Camera

Selection.)

• Press F2, then press the MON(ESC) button.
• Press F2, then press the EXIT button.

Note:

• This feature is available in only WJ-SX650 or

WJ-SX850 because of OSD limitation.

ALARM STATUS PG
ALM STATE NAME
1 DISARMED FRONT DOOR
1 ARMED BACK DOOR
1 ACTIVE –
1 ACKED –
1 CLEARED –
1 RESET –