Panasonic WV-ASC970 - User Manual
Page 15
15
●
i-Pro Camera Setup
Refer to each i-Pro camera Operational Manual.
i-Pro-
Cam
#
IP Address
Subnet Mask Port
MPEG4
Multicast
Multicast
Address
Multicast
Port
Alarm
Destination
Address
Authentication
ID/Passwd
1
172.16.192.4
255.255.0.0
80
On
On
239.192.0.20
20000
Server IPA
Default
2
172.16.192.5
255.255.0.0
80
On
On
239.192.0.20
20002
Server IPA
Default
3
172.16.192.6
255.255.0.0
80
On
On
239.192.0.20
20004
Server IPA
Default
4
172.16.192.7
255.255.0.0
80
On
On
239.192.0.20
20006
Server IPA
Default
5
172.16.192.8
255.255.0.0
80
On
On
239.192.0.20
20008
Server IPA
Default
6
172.16.192.9
255.255.0.0
80
On
On
239.192.0.20
20010
Server IPA
Default
7
172.16.192.10
255.255.0.0
80
On
On
239.192.0.20
20012
Server IPA
Default
8
172.16.192.11
255.255.0.0
80
On
On
239.192.0.20
20014
Server IPA
Default
●
Decoder WJ-GXD400 Setup
Refer to WJ-GXD400 Operational Manual.
Dec #
IP Address
Subnet Mask Port
OSD Position
Authentication
ID/Passwd
Camera Title
Time Date
Additional Info
1
172.16.192.20
255.255.0.0
80
Left Lower -2
Right Upper +1
Left Lower -1
Default
●
Network Disk Recorder WJ-ND400 Setup
Refer to WJ-ND400 Operational Manual.
NDR #
IP Address
Subnet Mask Port
Recoder
Ch-Camera link
Camera Setup
Schedule
Authentication
ID/Passwd
1
172.16.192.21
255.255.0.0
80
Necessary
Necessary
Always Recording
Default
Either WJ-ND400's PC port or CAMERA port can be used.
●
L3SW Setup
Set a restriction for the multicast message not to flow to Server PC port.
Valid the IGMP V2 due to support Multicast messages.
■
Hybrid System with i-Pro switch node and SX650 switch node
The following system contains one i-Pro video switch node and one SX650 video switch node. The analog video
from SX650 can be seen on the GXD400 monitor. The i-Pro video switch node consists of i-Pro cameras,
WJ-GXD400, WJ-NT314 and WJ-ND400. The SX650 video switch node contains a WJ-SX650 cage with Input,
Output and Network board (WJ-PB65E01). There are some video links from WJ-SX650 monitor output to
WJ-NT314 coaxial Input. The system also has WV-CU950 controller for system or local operators, and a PC station
with WV-ASC970 Admin Console.
The sample database – 01=hybrid.adm, #=hybrid.gdm-and sys.ini file – 01A=sys.ini-for Administration Console are
provided on the CD-ROM.