Panasonic WV-ASC970 - - Manual (Page 33)

33
Running Sequence
■
Tour Sequence
The following functions are available if a Tour Sequence
has been previously configured through the admin con-
sole. Any Tour Sequence can be assigned to any moni-
tors.
1. Select the desired monitor. (Refer to p. 27 Monitor
Selection.)
2. To select the desired Tour Sequence number, press
the numeric buttons.
Note:
• When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
3. Press the TOUR SEQ/GROUP SEQ button. The
Tour Sequence will run in forward direction on the
active monitor, and the Tour Sequence number
with "R" (Running) sign is displayed on the active
monitor.
Note:
• The messages on the LCD indicate the following.
Annn: Area No.
Tnnnn: Tour Sequence No.
R: Running
4. To pause the sequence, press the SEQ PAUSE/
SEQ STOP button.
The "P" (Pausing) sign will be displayed beside the
Tour Sequence number area on the active monitor,
and "P" will appear beside the Tour Sequence
number.
MON 1 CAM
0123 Unit:01 00512
MON A001T0001R CAM
0123 Unit:01 00512
MON A001T0001P CAM
0123 Unit:01 00512
Note:
• To switch to the next sequence step, press the +
button during sequence pause.
• To switch to the previous sequence step, press the
– button during sequence pause.
• To resume the sequence, press the TOUR SEQ/
GROUP SEQ again.
5. To return to spot monitoring, press the SEQ
PAUSE/SEQ STOP button while holding down the
SHIFT button.
Note:
• You can also return to spot monitoring by selecting
a camera.
■ Group Sequence
The following function is available only if a Group
Sequence has been previously established through
the admin console. A Group Sequence determines the
assignment of monitors and cameras.
1. Press the numeric buttons to select a desired
Group Sequence number.
Note:
• When you have selected a wrong number, press
the CLEAR button to clear the numeric input.
2. Press the TOUR SEQ/GROUP SEQ button while
holding down the SHIFT button. The Group
Sequence will run in forward direction on the
assigned monitors, and the Group Sequence num-
ber with "R" (Running) sign is displayed on each
monitor.
MON 1 CAM
0123 Unit:01 00512
MON A001G0001R CAM
0123 Unit:01 00512