Panasonic -eng User Manual
Page 244
Q&A
- 244 -
Other
Outputting files in [MPEG2 format hybrid
rendering (partial encoding)] is not successful.
• When outputting data using [MPEG2 format hybrid
rendering (partial encoding)] is not successful,
MPEG2 files can be created by specifying [MPEG2
format selection (re-encoding)].
SD cards cannot be formatted using this
software.
• Format SD cards with the SD Video Camera with
which this software is supplied.
A video file cannot be written to a DVD using an
SD Video Camera and the DVD BURNER.
• The following video files cannot be written to a DVD
using a DVD BURNER. In these cases, write files to
a DVD using this software on your PC. For writing
files to a DVD using the DVD BURNER and the
AUDIO REC settings, refer to the operating
instructions for the SD Video Camera.
- Video files recorded while the AUDIO REC of the
SD Video Camera is set to MPEG. Files are
captured to a PC with this software. The files are
then edited and output to an SD card.
- Video files recorded while the AUDIO REC of the
SD Video Camera is set to DOLBY (if possible).
Files are captured to a PC with this software. The
files are then output to an SD card.