Panasonic -eng - Manual (Page 177)

Output mode
- 177 -
DVD R/RW output mode
Outputting to DVD R/RW
On completing the settings from the previous page, insert
a DVD R/RW disc into the drive and start the output.
Action Required
` Do not under any circumstances use other writing
applications while output processing. This may result in
disc write failure and destroy the disc.
Note
` The file resulting from recording to the DVD R/RW disc
is called “Title”.
1. Insert an unused DVD R disc or DVD RW disc
into the DVD R/RW drive.
Use discs supported by the DVD R/RW drive being
used.
2. Click and then click [Yes] when the
confirmation message is displayed.
Status progress is displayed.
When the writing is completed, the message will
appear.
• Processing is carried out in the order of “Title
creation”, “Menu creation” and “Disk image writing”.
Output can be cancelled by clicking
during “Title
creation” and “Menu creation”. Output cannot be
cancelled during “Disk image writing”.
• Additional data cannot be added to DVD RW discs
already containing data.
• If a DVD RW disc containing recorded data is
inserted, an overwrite message or format message is
displayed. Follow the onscreen instructions.
Overwriting or formatting will erase all existing
recorded data on the disc.
3. Click .
Exits DVDWriter and returns to MotionSD STUDIO.