Panasonic -eng - Manual (Page 233)

Q&A
- 233 -
Writing to DVD R/RW disc is not successful.
Writing to DVD R/RW disc is not
successful.
Additional data cannot be written to DVD R/RW
discs with existing data.
• This software does not support writing additional
data to DVD R/RW discs with existing data.
The message [The disc space is insufficient.]
appears and the data cannot be imported.
• Writing cannot be performed because the volume of
the data exceeds the maximum capacity of the
DVD R/RW (
@ 178 ) in the drive.
Release the registration of the registered file or
change to a lower image quality setting in file output
mode, re-save the data to the library and then write
to DVD R/RW disc.
The drive is not recognized, or the message [No
drive] is displayed.
• Select [My Computer (Computer)] from the start
menu (or double-click [My Computer (Computer)] on
the desktop), and check whether the drive has been
recognized or not.
• If writing software made by companies other than
Panasonic or ASPI drivers supplied with scanners,
printers, etc., writing on a DVD disc may not be
completed properly. In this case, uninstall other
applications (ASPI driver) and then reinstall
MotionSD STUDIO. (When uninstalling or installing
MotionSD STUDIO, follow the instructions on the
screen, and reboot the personal computer without
fail.) When multiple DVD drives are connected, they
may not be recognized properly.
Methods for solving common problems when writing files
to DVD R/RW discs.