Panasonic PT-L780NTE - Manual (Page 2)

2
PT-L780NT
Wireless Portable LCD Projector
S P E C F I L E
Specifications
Main Unit
Power supply:
100 – 240 V AC, 50/60 Hz
Power consumption: 380 W (during standby mode with fan stopped: Max. 3.5 W)
Optical system: Light separation by dichroic mirror, prismatic synthesis
LCD panel: Panel size: 1.0˝ diagonal (4:3 aspect ratio) with Micro Lens Array
Display method: Transparent LCD panel (x 3, R/G/B)
Drive method: Active matrix
Pixels: 786,432 (1,024 x 768) x 3 (total of 2,359,296)
Pixel configuration: Stripe
Lens: Powered zoom/focus lens (1:1–1:1.3),
F 1.7–2.1, f 40.7– 52.8 mm
Lamp: 270 W UHM lamp
Projection size: 1,016 –7,620 mm (40–300 inches) diagonally (4:3 aspect ratio)
Colors: Full color (16.7 million colors)
Brightness: 3200 ANSI lumens (with supplied lens)
Center-to-corner uniformity ratio: 90%
Resolution: RGB: 1024 x 768 pixels, Video: 760 TV lines
Scanning frequency:
RGB: Panasonic Intelligent Auto Scanning (PIAS) system
Horizontal: 15–91 kHz, Vertical: 56–87 Hz
YP B P R: 480i/525i: Horizontal: 15.75 kHz, Vertical: 60 Hz
625i: Horizontal: 15.63 kHz, Vertical: 50 Hz
480p/525p: Horizontal: 31.5 kHz, Vertical: 60 Hz
720p/750p: Horizontal: 45 kHz, Vertical: 60 Hz
1080i/1125i: Horizontal: 33.75 kHz, Vertical: 60 Hz
1080i/1125i: Horizontal: 28.125 kHz, Vertical: 50 Hz
S-Video/Video: NTSC/NTSC4.43/PAL-M/PAL-60: Horizontal: 15.75 kHz, Vertical: 60 Hz
PAL/SECAM/PAL-N: Horizontal: 15.63 kHz, Vertical: 50 Hz
Optical axis shift: 10 : 0 (fixed)
Keystone correction angle: Vertical: ±35° with no horizontal correction (with supplied lens)
Horizontal: ±7° with no vertical correction (with supplied lens)
* Correction range differs when both vertical and horizontal keystone
distortions are corrected at the same time. Also it differs depending on
input signal.
Installation: Ceiling/desk, front/rear (menu selection)
Built-in speakers: Size: 4 x 3 cm/1.6˝ x 1.2˝ (x 2)
Output power: 2.0 W + 2.0 W
Terminals: DVI-D IN: DVI-D 24-pin x 1
RGB1 IN: D-sub HD 15-pin x 2
G: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75
Ω
R, B: 0.7 Vp-p, 75
Ω
HD/VD/SYNC: TTL, high impedance (positive/negative polarity)
Y, P B , P R : Y: 1.0 p-p, 75
Ω
, P B, P R : 0.7 Vp-p, 75
Ω
RGB2 IN/RGB OUT*: D-sub HD 15-pin x 2
G: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75
Ω
R, B: 0.7 Vp-p, 75
Ω
HD/VD/SYNC: TTL, high impedance (positive/negative polarity)
Y, P
B
, P
R
: Y: 1.0 p-p, 75
Ω
, P
B,
P
R
: 0.7 Vp-p, 75
Ω
* Selectable with on-screen menu. Serves as an output terminal for
RGB1 or RGB3 input.
RGB3 IN: 5-BNC x 1
G: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75
Ω
R, B: 0.7 Vp-p, 75
Ω
HD/VD/SYNC: TTL, high impedance (positive/negative polarity)
Y, P B , P R : Y: 1.0 p-p, 75
Ω
, P B, P R : 0.7 Vp-p, 75
Ω
AUDIO IN for RGB: M3 (L, R) x 1, 0.5 Vrms, common for DVI-D, RGB1, RGB2 and RGB3
inputs
VIDEO IN: RCA x 1, 1.0 Vp-p, 75
Ω
S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75
Ω
as of July 2002