Airlink101 AR570W - Manual (Page 71)

72
After you finish with all settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures,
or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.6.2.2 UPnP
You can select enable or disable UPnP feature here. After you enable the UPnP feature, all
client systems that support UPnP, like Windows Vista, can discover this router automatically.
3.6.2.3 Reset (Reboot)
Click Apply button under the Reset section if you want to reboot the router.