Airlink101 AR570W User Manual
Page 34
35
Parameter
Description
Enable Static Routing
Check/uncheck to disable/enable the NAT function.
Destination LAN IP
Enter the IP Address of the destination LAN.
Subnet Mask
Enter the Subnet Mask of the destination LAN.
Default Gateway
This is the gateway IP Address where packets are sent. Input
the gateway IP Address.
Hop Count
Enter the maximum number of steps between network nodes
that data packets will travel. A node is any device on the
network, such as a computer, print server, or router.
Interface
This interface tells you whether the Destination IP Address is on
the LAN & Wireless (Ethernet and wireless networks) or the
WAN (Internet).
Add
Click on Add to add the routing rule to Router’s routing table.
Reset
You can also click ‘Reset’ button to clear all data you entered.
From the Current Static Routing Table, you can check each Static Routing setting.
Parameter
Description
Delete
If you want to delete a setting, check the ‘select’ box of the
setting you want to delete, then click ‘Delete’ button. (You can
select more than one setting).
Delete All
If you want to delete all settings listed here, please click ‘Delete
All’ button.