Airlink101 AR570W - Manual (Page 58)

59
Parameter Description
Rule Name Please give a name to this QoS rule (up to 15 alphanumerical
characters).
Bandwidth Set the bandwidth limitation of this QoS rule. You have to select the data
direction of this rule (Upload of Download), and the speed of bandwidth
limitation in Kbps, then select the type of QoS: “guarantee” (guaranteed
usable bandwidth for this rule) or “max” (set the maximum bandwidth for
the application allowed by this rule).
Local IP Address Specify the local (source) IP address that will be affected by this rule.
Please input the starting IP address in the left field, and input the end IP
address in the right field to define a range of IP addresses, or just input
the IP address in the left field to define a single IP address.
Local Port Range
Please input the range of local (source) port numbers that will be
affected by this rule. If you want to apply this rule on port 80 to 90,
please input 80-90; if you want to apply this rule on a single port, just
input the port number, such as 80.
Remote IP Address
Specify the remote (destination) IP address that will be affected by this
rule. Please input the starting IP address in the left field, and input the
end IP address in the right field to define a range of IP addresses, or just
input the IP address in the left field to define a single IP address.
Remote Port Range
Please input the range of remote (destination) port number that will be
affected by this rule. If you want to apply this rule on port 80 to 90,
please input 80-90; if you want to apply this rule on a single port, just
input the port number, such as 80. If the remote (destination) IP address
and /or port number is universal, just leave it blank.
Traffic Type
Please select the traffic type of this rule, available options are None,
SMTP, HTTP, POP3, and FTP. You can select a specific traffic type for
this rule, if you want to make this rule as a IP address based rule (apply