Airlink101 AR570W - Manual (Page 38)

39
SSID airlink101 This is the name of your wireless network. You can type
any alphanumerical characters here, maximum 32
characters. SSID is used to identify your own wireless
router from others when there are other wireless routers
in the same area. It’s recommended to change default
SSID value to the one which is meaningful to you, like
myhome, office_room1, etc.
Channel
Number 6 Please select a channel from the dropdown list of
‘Channel Number’ for broadcasting. You can choose any
channel number you want to use, and almost all wireless
clients can locate the channel you’re using automatically
without any problem. However, it’s still useful to
remember the channel number you use, some wireless
client supports manual channel number select, and this
would help in certain scenario when there is some radio
communication problem.
Show
Active Clients Click “Show Active Clients” button, then an “Active
Wireless Client Table” will pop up. You can see the
status of all active wireless clients that are connecting to
the Router.
After you finish with all settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures,
or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.2.2 Wireless Security
The AR570W Wireless 150 Router provides complete wireless LAN security functions,
including WEP, IEEE 802.11x, WPA2/WPA-PSK and WPA with RADIUS. With these
security functions, you can prevent your wireless LAN from illegal access. Please make
sure your wireless clients use the same security settings.