Panasonic HC-V250K - Manual (Page 124)

- 124 -
∫ If the device is Android (non-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connection.
For US customers enter SSID and Password or scan QR code to connect.
≥ [WPS Connection] ( l 157 )
≥ Connecting with QR code ( l 157 )
≥ Connecting by entering an SSID and Password ( l 158 )
When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a direct connection”.
(
l 125 )
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [WPS Connection] ( l 153 )
≥ Searching for wireless access points to set up a connection ( l 154 )
≥ Setting up a connection manually ( l 155 )
When the Wi-Fi connection is complete, proceed to “Using [Link to Cell] with a wireless access point
connection”. (
l 126 )
≥ Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. ( l 152 )
Setting up a Wi-Fi connection via a wireless access point