Charging and recording time, Battery capacity indication – Panasonic HC-X920K User Manual
Page 13

13
VQT4R14
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
* This will be the recording mode when the 3D Conversion Lens (optional) is attached.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
∫ Battery capacity indication
The battery capacity indication is displayed on the LCD monitor.
≥ If there is less than 3 minutes remaining, then
will become red. If the battery discharges,
then
will flash. Recharge the battery or replace it with a fully charged battery.
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable time
Actual
recordable
time
Supplied battery/
VW-VBN130 (optional)
[7.2 V/1250 mAh]
2 h 30 min
[1080/60p],
[AVCHD 3D]*
1 h 20 min
(1 h 15 min)
50 min
(45 min)
[PH], [HA],
[HG]
1 h 25 min
(1 h 15 min)
50 min
(45 min)
[HE], [SbS 3D]*
1 h 25 min
(1 h 15 min)
55 min
(45 min)
[iFrame]
1 h 30 min
(1 h 20 min)
55 min
(45 min)
HC-X920&X920M&X910P&PC&PU_VQT4R14_mst.book 13 ページ 2012年12月27日 木曜日 午前10時44分