Argus Camera Bean - Carabiner User Manual
Page 41
40
a): If the SD card has not been formatted previously.
b): Repeat formatting if the camera does not recognize the card
although it has been formatted before;
c): Format the card before using it with another camera.
Attention: Make sure that the card is unlocked before inserting
the card into camera. All data will be deleted when the card is
formatted, please backup the data before formatting.
Memory card format
a.
Confirm the card is unlocked.
b.
Insert the card before turning the camera on.
c.
Press “MENU” button then select “Setup”.
d.
Push the joystick UP/DOWN to select “format”.
e.
Push the joystick right to launch the submenu.
f.
Select “yes” by pushing the joystick up then press down on
the joystick to start formatting.
g.
Press the menu button to exit.
Attention: do not pull out the card during image capture.