Argus Camera Bean - Carabiner - Manual (Page 27)

26
a) Push the joystick up/down to select “TV Output”.
b) Push the joystick right to launch the submenu: “NTSC;
“PAL”.
c) Push the joystick up/down to select the proper TV mode;
then press down on the joystick to confirm the setting.
d) Press the menu button to return.
D: Play Logo
Use this function to turn on or off the startup image.
a) Push the joystick up/down to select “Play Logo” then
push it right for 2 options: “Enable” or “Disable”.
b) Push the joystick up/down to select the operation you
need and press down on the joystick to confirm.
c) Press the menu button to return.
Attention:
No startup image will be displayed when you select
“Disable”.
E: Light Frequency