Asus WL-330 - Manual (Page 47)

3-21 ASUS Pocket Wireless Access Point (WL-330)
Configuration
AP Modes
Access Point Only
The ASUS Pocket Wireless AP is set to Access Point Only mode by default. In
this mode, the device only performs as an AP that connects wireless clients to a
wired Ethernet network. The picture below illustrates the device in Access Point
Only mode.
Hybrid-Active
When set to Hybrid-Active mode, the ASUS Pocket Wireless AP actively
connects to all APs specified in the MAC address list upon startup to form a
wireless bridge while maintaining connection with the wireless clients in its
own network. The MAC address list is enabled when the AP mode is set to
Hybrid-Active.
Hub
Internet
Wireless client
Wireless client
Hybrid-Passive
The ASUS Pocket Wireless AP performs the same function in Hybrid-Passive
mode. However, in this mode, the device waits for anonymous connection
requests from other APs to form a wireless bridge. The MAC address list is
disabled when you select this mode.
Hub
Access point
Hub
Access point
Hub
Wireless client
Wireless client