Avaya 16-300310 - Manual (Page 13)

Configuration of SIP video endpoints on Communication Manager 6.0
AVTS R 6.0 Quick Setup For feedback, use [email protected] August 2010 13
3 Enabling SIP protocol
Select Communications, click on SIP, and set the following parameters:
●
SIP Username : ext. This parameter is the same as step 1 of Table 4: Adding
video users on page 10
●
Authorization Name : Same as SIP Username
●
Authorization Password : Same as the Shared Communication Profile
Password used in step 2 of
Table 4: Adding video users on page 10
●
SIP registarion : Through Proxy
●
SIP Proxy : Enabled
●
Proxy Hostname : Session Manager FQDN or IP address used for registration.
This is the Session Manager Security Module / SIP Entity IP address or
corresponding FQDN.
●
SIP Registrar : Enabled
●
Registrar Hostname : Same as Proxy Hostname
●
TCP Signalling : Enabled
4 Confirming Registrar Status
Select Communication, click SIP and confirm if:
●
Registrar Status: Registered
Table 5: Configuring Avaya Series 1000 Video Conferencing Endpoints