Diagnostics – chirps table, Lcd transmitter operation – Autostart CT-5460TW User Manual
Page 15

User Guide
P. 15
15 minutes
20 minutes
25 minutes
30 minutes
LCD Transmitter Operation (
Second Car Control
)
Basic Vehicle Operation
FUNCTION
BUTTON PRESS
ICON
BUZZER
DESCRIPTION
LOCK
+
1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK
+
2 Beeps
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
START
+
+
Melody Starts
the
engine
STOP
+
None
Melody
Stops the engine
Start and Stop While in Safe Start Mode
FUNCTION
BUTTON PRESS
ICON
BUZZER
DESCRIPTION
START ON SAFE
START MODE
+
X 2
+
Melody
Press the
and buttons
simultaneously twice within
3 seconds.
Press for 1 second (a melody
will be heard) then press 1sec
and a melody will be heard
again.
STOP ON SAFE
START MODE
+
None Melody
Diagnostics – Chirps Table
Chirps
Description
1
x Doors locked, alarm and starter kill armed.
x Lock confirmation.
x Entering mode 1 in the programming centre.
x Disarmed notification
2
x Doors unlocked, alarm and starter kill disarmed.
x Transmitter programmed.
x Entering mode 2 in the programming centre.
3
x Lock and arm while a zone is left unprotected.
x Entering mode 3 in the programming centre.
x Door zone left unprotected.
4
x Unlock and disarm: an intrusion was detected (in warning chirps mode or full chirps
mode).
x Entering tach-programming mode.
5
x Siren or horn chirp timing adjustment
Constant up to
30 seconds
x In horn mode: alarm condition generated by an intrusion, by panic mode or when the
system is powered up. the horn will sound for 30 sec.
Constant up to
60 seconds
x In siren mode: alarm condition generated by an intrusion, by panic mode or when the
system is powered up. the siren will sound for 60 sec.