Multi-level features – Autostart CT-5460TW User Manual

Page 10

P. 10

User Guide

x On models where starter kills were installed, pressing the

LOCK

button will

also activate the starter kill.

x On alarm models, pressing the

LOCK

button will also activate the monitoring.

The Stop Confirmation Was Not Received

If after remote stopping the vehicle no confirmation was received

i.e. the display did not

return to its basic state

simply press the

LOCK

button, this will refresh the display. If the

engine was stopped, the smoke icon and the hourglass icon will disappear and the time will be
displayed.
Pressing the

LOCK

button will also lock all doors (the lock icon will appear). If the doors were

already locked prior to pressing the

LOCK

button, there will be no change in the status of the

doors

i.e. the doors will remain locked.

x On models where starter kills were installed, pressing the

LOCK

button will

also activate the starter kill.

x On alarm models, pressing the

LOCK

button will also activate the monitoring.

Multi-Level Features (

default state)

Basic Features (press the

FUNCTION

button 1X

)

FUNCTION

LOCK:

.........................................

aux 2

FUNCTION

START/STOP

..................................

cold weather

Multi-Car Operation (press the

FUNCTION

button 2X)

FUNCTION

LOCK

:..................

car lock

FUNCTION

UNLOCK

:...............

car unlock

FUNCTION

START/STOP

: ..........

car start/stop

FUNCTION

TRUNK

: ................

car trunk

Customized Features (press the

FUNCTION

button 3X)

(May not be compatible with some vehicles)

Your installer can add customized features such as turning on the radio, opening sliding doors, etc.

FUNCTION

LOCK

:............

customized feature 1

FUNCTION

UNLOCK:

.........

customized feature 2

FUNCTION

START/STOP:

.....

customized feature 3

FUNCTION

TRUNK:

...........

customized feature 2

By default, the multi-level features are programmed as follows:

x Level 1 (Basic Features)

x Level 2 (Multi car operation)
x Level 3 (Customized Features)

Accessing the Multi-Level Features and Other Transmitter Functions

x To access a Level 1 feature, press and hold the

FUNCTION

button until you hear a “beep”; within

three seconds of hearing the “beep”, release the

FUNCTION

button.

will be displayed. This

display means that you are now in Level 1. Simply press the corresponding button to access
the desired feature.

x To access a Level 2 feature, press and hold the

FUNCTION

button until you hear a “beep within

three seconds of hearing the “beep”, release the

FUNCTION

button and press and release the

FUNCTION

button once more.

will be displayed. This display means that you are now in

Level 2. Simply press the corresponding button to access the desired feature.

x To access a Level 3 feature, press and hold the

FUNCTION

button until you hear a “beep”; within

three seconds of hearing the “beep”, release the

FUNCTION

button and press and release the

FUNCTION

button two more times.

will be displayed. This display means that you are now

in Level 3. Simply press the corresponding button to access the desired feature.

x To access the transmitter functions (clock and alarm adjustments), press and hold the

FUNCTION

button until you hear a “beep”; within three seconds of hearing the “beep”, release the

FUNCTION

button and press and release the

FUNCTION

button three more times. There will be two quick

“beeps” indicating that you are now in the transmitter functions adjustment menu. The Hour
position will be flashing. Simply press and release the

FUNCTION

button until you reach the

desired location and proceed with the adjustment by pressing the

START/STOP

TRUNK

buttons.