Autostart CT-5460TW - Manual (Page 13)

User Guide P. 13
Transmitter Mode Selection
FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DESCRIPTION
POWER-SAVING
MODE +
( + ) Melody
Press unlock first and then
press the function button and
the lock button
simultaneously.
VIBRATION MODE
+
Vibrates 4X
ALARM CLOCK
MODE ON/OFF +
Melody
Press once to switch the Alarm
Clock ON
Press twice to switch the Alarm
Clock OFF
Time or Alarm Clock Adjustments
User Transmitter
1. Press and hold the FUNCTION button until a
beep is heard
The backlight will turn on the moment the
FUNCTION button is pressed.
2. Upon hearing the beep, release the
FUNCTION button,
.............................. is displayed
3. Press and hold the FUNCTION button once
more
4. Release the FUNCTION button when a beep
is heard,
.............................. is displayed
5. Press and hold the FUNCTION button once
more until a beep is heard,
6. Release the FUNCTION button .............................. is displayed
7. At that point, press and hold the FUNCTION
button until 2 beeps are heard.
....................... The hour setting will start to
flash.
Pressing the FUNCTION button
1X .................................Adjust hour (current time)
2X ........................... Adjust minutes (current time)
3X .......................................... Adjust hour (Alarm)
4X ..................................... Adjust minutes (Alarm)
5X ... Melody selection for the ringing of the alarm
6X ...........Activate (ON) / Deactivate (OFF) Alarm
7X .................................. Adjust hour (countdown)
8X ............................. Adjust minutes (countdown)
9X .................Melody selection for the countdown
10X .Activate (ON) / Deactivate (OFF) countdown
a. Press the button to increase the
value or to activate or deactivate a
function or to toggle through the
melodies.
b. Press the to decrease the value or to
activate or deactivate a function or to
toggle through the melodies.
c. To save modifications, do not touch any
buttons for approx 10 to 15 seconds.
There will be a beep and the display will
return to the time.