Apex Digital Apex EmergeCard Remote Access - Manual (Page 42)

Emerge Card Remote Access User Guide Operation •••• 38
Optimizing Mouse Performance
Apex recommends that all servers controlled by the Emerge system be adjusted as follows prior to
installation.
To adjust Standard PS/2 mouse drivers
Access via Control Panel>Mouse>Motion tab>Pointer Speed
The mouse motion rate needs to be set all the way to SLOW. The EmergeCard device then can use a
calculation matrix to move the mouse at the target server the appropriate distance and speed to
match the remote client.
To adjust Intellimouse drivers
Access via Control Panel>Mouse>Pointer Options>Pointer Speed
The Pointer Speed needs to be set at the center (or fifth) position. Advanced – Pointer Acceleration
needs to be turned off and any mouse snap features need to be deactivated.