Apex Digital Apex EmergeCard Remote Access - Manual (Page 13)

Emerge Card Remote Access User Guide Installation •••• 9
Connecting to an OutLook Switch or a Server
The Emerge can be attached directly to an OutLook switch or to a server to allow the remote user to
gain access to servers or remotely access commands and functionality of remote switches.
Connect directly to a server
The Emerge can be connected directly the keyboard, monitor, and mouse ports of a server or other
single computer.
Connect to a switch console port
The Emerge can be connected to the console port of an OutLook switch as if it were a user. All (4, 8,
or 16) system ports are available for servers. Monitor installation is optional. Connect a monitor if
you want to perform setup or maintenance locally at the Emerge system.
Connect to a switch system port
The Emerge can be connected to one of the computer ports of an OutLook switch as if it were a
computer. All four (or two) user consoles are available for users. This configuration does not require a
keyboard and mouse to be attached to the Emerge system. Onsite users can perform maintenance.